Go Back   Natural Medicine Talk > Health > Alternative Therapies

Reply
 
Thread Tools Display Modes
  #1  
Old 01-13-2018, 02:51 PM
abeland1 abeland1 is offline
Observer
 
Join Date: Jan 2018
Posts: 4
abeland1 is on a distinguished road
Default The Art of making Colloidal Silver


There are three factors that will determine the quality of the colloidal silver that you make. The first is the water that you use. It must be distilled to a high degree of purity. You will need some way to check that the water you are using is pure enough. The distilled water that is sold in grocery stores in 1-gallon containers will generally be good enough. You will still need some way to check it. That can be done with a conductivity meter or by some method included in the design and function of whatever generator we use.

The second factor is the purity of the silver that we use. We want silver ions and preferably no other metals. We want to make a solution containing silver ions, as they are proven to be of great benefit. There are many other metals. However, that can do us great harm. We must take every precaution we can to avoid taking toxic metals into our bodies. That is why we use only 9999 silver wire and insist on a certificate of analysis showing the impurities that are present. In the case of the highest quality silver, the largest impurity will be copper which is not bad in small amounts. That will be the case in silver that comes directly from silver ore that is refined directly. If you buy silver without an assay certificate, it could contain scraps from manufacturing facilities that are alloying silver with any number of other metals. So it's not just a matter of it being 9999, but what is the nature of the other .01%. When you consider the fact that when we make colloidal silver, the result is a liquid solution with silver in parts per million (PPM), it makes no sense to try to economize on this. If we consider making colloidal silver at a strength of 10 PPM, for example, 1 ounce of silver wire could make theoretically 100,000 ounces or 1500 gallons of colloidal silver.

The third factor is the amount of time that we allow the process. Hydrogen will appear at the cathode (the negatively charged electrode, where electrons enter the water), and oxygen will appear at the anode (the positively charged electrode). Back in the days of the 3 9 V battery and coins, we would wait until we saw a cloud of what we were told were pieces of silver forming in the water and stopping the process soon after that. In reality, the cloud formed by hydrogen and oxygen micro bubbles and meant that the process was in a runaway mode. Disconnecting the batteries at that point would, if you were lucky, get you perhaps a five PPM colloidal silver solution. It would not keep its strength for very long as the larger particles would quickly collide with and absorb the silver ions. A few of us promoted the use of current limiting to prevent the runaway condition. Some of us noted that the higher resistance we used, the better results we obtained in both higher PPM and stability. Many of us, including yours truly, tried every conceivable method of stirring to allow the use of a higher current to speed up the process. All of my efforts in this direction failed. I could not get around the fact that for a given surface area of silver anode only a certain amount of current was allowed. There is a region surrounding the anode called the Nernst diffusion area. To put it simply, it is a region that will only allow a certain density of ions to exist before they agglomerate into larger particles. So for those of you with your setups for making colloidal silver, try reducing the current and allowing more time and let us know the results.
Reply With Quote
  #2  
Old 01-17-2018, 10:45 AM
abeland1 abeland1 is offline
Observer
 
Join Date: Jan 2018
Posts: 4
abeland1 is on a distinguished road
Default

Another item that you will find useful is a quality laser pointer. Nothing from China. High-quality laser pointers have a current regulating circuit which ensures that the output of the laser remains the same no matter what the condition of the batteries. The rated power is maintained until there is no laser action whatsoever, at which time the batteries have to be replaced. The cheap ones from China will vary in power, therefore making a very poor test instrument. The laser pointer will enable you to see the generation of the small particles, as they are being made. This will occur after you have achieved the highest possible ionic portion, the ions are combining to form larger particles. In the days before we had laser pointers to use, we did not know whether or not we had made colloidal silver until a yellow hue appeared. The yellow hue was caused by the presence of particles larger than of 40 nm in size. It creates a yellow because the particles block the blue part of the spectrum. If you subtract blue from the rest of the spectrum, you have a red green that you see as yellow. The smaller particles are more desirable as they have more surface area.
Reply With Quote
Reply

Tags
colloidal silver
Please reply to this thread with any new information or opinions.

Thread Tools
Display Modes


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ionic silver or colloidal silver? Audi Alternative Therapies 5 02-06-2018 10:55 AM
Ionic Silver Vs. Colloidal Silver pinballdoctor Vitamins & Supplements 4 02-28-2013 05:42 PM
MMS + Colloidal Silver Mavy Alternative Therapies 6 01-19-2013 04:46 PM
Colloidal Silver - Did I take too much? CrimpJiggler Alternative Therapies 5 09-09-2011 02:21 PM
Colloidal Silver and Flu MegRG Colds, Flu & Fever 19 10-13-2010 07:06 PM